Table of Contents
Advertisement
e_tm200_7fm.book Page 48 Tuesday, November 9, 2004 9:14 PM
Shooting and Sending a Picture/Video
Function
After taking a picture or recording video, you can send it
directly from "Create photo/video" mode via MMS or
E-mail message.
1
After taking a picture or recording video, press
B.
The "Send to" list appears.
When recording a video clip, options appear when
B
pressing
to stop recording.
The last address where a message was sent is at
the top of the list.
2
Press a or b to highlight the phone number or
E-mail address of the recipient.
If you cannot find the phone number or E-mail
address that you wish to send the picture to, select
"Others..." and enter the necessary information.
3
Press B.
Press
a
or
b
to highlight "Send" and press
The message is sent.
When attaching a photo/picture file to a message,
the size of the file is automatically reduced if
exceeding the maximum (295 kbytes) size to
send.
7-48
You can also send a voice memo after recording.
For information on the voice memos, refer to
"Using Memo Recording" on page 13-120.
Deleting Photo/Video Clips
For information on how to delete photos or video clips,
refer to page 12-96 for deleting photos and page 12-109
for deleting video clips.
When the Memory Space is Low
When the available memory space in "My photos/My
videos" is low, the remaining shots indicator in the upper
left of the screen turns red. If the memory space becomes
zero and when you try to take a photos again, "Memory
full. You cannot take a picture!" ("Memory full. You cannot
record a video!" in the "Create video" mode) appears.
B
.
Advertisement
Table of Contents
