Table of Contents
Advertisement
e_tm200_7fm.book Page 41 Tuesday, November 9, 2004 9:14 PM
Selecting the Frame
You can select and set a frame from preset patterns or
saved pictures.
1
At the main menu, select in the following order:
"Camera" → "Create photo."
2
Press C [Options].
The "Options" menu appears.
3
Press a or b to highlight "Add frame" and
press B.
4
Press a or b to highlight "Preset frames" or
"Off" and press B.
If you do not wish to add a frame, select "Off."
5
Press a, b, c or d to select the frame you
wish to view and press B.
You can only select a frame when the picture
size is set to "Small" or "Tiny."
If you activate "Continuous shooting," you
cannot set a frame.
Using Continuous Shooting
Four pictures are taken in succession. Auto shooting and
manual shooting are available.
1
At the main menu, select in the following order:
"Camera" → "Create photo."
2
Press C [Options].
The "Options" menu appears.
3
Press a or b to highlight "Continuous
shooting" and press B.
4
Press a or b to highlight "Auto shooting" or
"Manual shooting" and press B.
"Auto shooting": Four pictures are taken in a row
by pressing
"Manual shooting":
Pictures are taken one by one
by pressing
To cancel continuous shooting, select "Off" in this
step.
5
Press B to start continuous shooting.
When the continuous shooting is finished, the
pictures taken are saved automatically.
To end the function, press
You can only use the continuous shooting
function when the picture size is set to "Small"
or "Tiny."
If you select a frame when taking pictures, you
cannot use the continuous shooting function.
B
.
B
.
A
[Cancel].
7-41
Advertisement
Table of Contents
