Using The Flash Light - Sharp TM200 Operation Manual

e_tm200_7fm.book Page 47 Tuesday, November 9, 2004 9:14 PM

Using the Flash Light

When taking a picture or recording video in a dark place,
you can use the Flash light.
1
At the main menu, select in the following order:
"Camera" → "Create photo" or "Create video."
2
Press C [Options].
The "Options" menu appears.
3
Press a or b to highlight "Flash light" and
press B.
4
Press a or b to highlight "On" or "Off" and
press B.
Q
Pressing also activates the Flash light.
Changing the View Finder
You can use the external display as the view finder. This
function is convenient for taking a self-portrait or a group
picture.
1
At the main menu, select in the following order:
"Camera" → "Create photo" or "Create video."
2
Press C [Options].
The "Options" menu appears.
3
Press a or b to highlight "Change viewfinder"
and press B.
The main display is turned off and the image
through the camera lens appears in the external
display and focus mode is set to "Autofocus."
When taking a picture or stopping a video recording,
the view finder automatically switches to the main
display.
You can also change the view finder by pressing
P X
( ) in "Create photo/video" mode.
7-47