Removing The Memory Card; Formatting The Memory Card - Sharp TM200 Operation Manual

e_tm200_7fm.book Page 20 Tuesday, November 9, 2004 9:14 PM

Removing the Memory Card

1
Turn off the handset.
2
Open the SD memory card slot cover,
remove the card and close the cover.
When you remove the memory card while the
handset is turned on, the message "Memory
card is removed" appears in the main display
and the memory card icon disappears from
both the main and external displays.
Do not remove the memory card while the
memory card is being formatted, written or
read.
3-20

Formatting the Memory Card

If you wish to clear all data stored in the memory card,
format the memory card according to the following steps.
The handset code is needed to format the memory card.
For information on the handset code, refer to "Enabling
the Handset Lock" on page 15-154.
1
Press .
B
The main menu appears.
2
Press , , or
a b c d
and press .
B
3
Press or to highlight "Memory card" and
a b
press .
B
4
Press or to highlight "Format" and press
a b
.
B
5
Enter your handset code and press
If you wish to cancel, press
entering the handset code.
to highlight "Settings"
.
B
A
[Back] before