Vibration; Light Colour; Keypad Tones - Sharp GX30 User Manual

Vibration

When the vibrator option is set on, the phone will
vibrate for incoming calls regardless of the ringer
volume and tone settings.
1.
Perform steps 1 to 4 in "Customising Profiles" on
page 138.
Press a or b to highlight "Vibration", then press
2.
to select.
Press a or b to highlight "Enable", "Disable" or
3.
"Link to Sound", then press
Tip
• When the "Link to Sound" option is selected in step
3, the vibrator synchronises with your selected
melody to pulse in time with the melody. Please note
that not all melodies support the "Link to Sound"
option. Should you select such a melody, only the
"Enable" option in step 3 will allow vibrator
function.
• When you select "Enable" or "Link to Sound" in step
3, " " is displayed on the stand-by screen.
140 Profiles
to select.

Light Colour

You can select from 7 colours and 1 pattern for each
profile and change it during an incoming call.
1.
Perform steps 1 to 4 in "Customising Profiles" on
page 138.
Press a or b to highlight "Light Colour", then
2.
press to select.
Press a or b to highlight the desired light colour
3.
or pattern, then press
Tip
• If you select "Disco" in step 3, all 7 colours flash in
order during an incoming call.

Keypad Tones

When the keypad tone is set on, you will hear a
confirmation tone each time you press any keys.
1.
Perform steps 1 to 4 in "Customising Profiles" on
page 138.
Press a or b to highlight "Keypad Tones", then
2.
press to select.
to select.