Removing And Installing Wiring Harness - BMW F 650 GS Repair Manual

1
•
Remove the 3 securing screws (1) from the rear
of the housing.
•
Press back the 4 snap locks (arrows) on the plug
housing and press out the instrument panel.
•
Installation is the reverse of the removal proce-
dure.
Removing and installing wiring har-
ness
– Remove instrument cluster (
2
•
Pull out the warning lights (2) with the rubber
grommets.
•
Disconnect the wiring harness (3).
•
Installation is the reverse of the removal proce-
dure.
E620030
62.6).
a
3
E620051
62.7