Assembling engine
11 00 103
–
Install the gearbox (
a
Installing crankshaft and bal-
11 21 511
ancing shaft
•
Secure right side of engine housing in engine
bracket with magnet side facing downwards.
1
•
Install balancing shaft in engine block; mark (1)
must be aligned with mark (3) on block.
•
Coat 1.0 mm (0.04 in) thrust washer with oil and
mount on crankshaft.
•
Rotate crankshaft before installing, so that
mark (2) is aligned with mark (3).
•
Fit gasket.
•
Oil thrust washers and install on crankshaft and
balancing shaft.
L
Note:
Oil shaft bearing points.
Re-shim the crankshaft and balancing shaft if the
housing or either of the shafts was renewed.
•
Coat the balancing shaft bearing journals with
Optimoly MP 3.
23.7).
2
3
E110330
Shimming crankshaft
•
Using depth gauge, BMW No. 00 2 550, meas-
ure distance from crankshaft web to housing
mating face = dimension "B".
•
Measure distance from left engine housing mat-
ing face to shim contact face = dimension "A".
–
Dimension "A" minus dimension "B" = crankshaft
endplay.
B
F111041
A
F111050
11.43