Stack - Ricoh C4540 Operating Instructions Manual

Copying
Reference
See p.163 "Function Compatibility".
Changing the number of sets
You can change the number of copy sets during copying.
2
Important
❒ This function can only be used when the Sort function is turned on.
A
While "
Copying...
B
Press [Change Quantity].
C
Enter the number of copy sets with the number keys, and then press the
{q} key.
D
Press [Continue].
Copying starts again.
Note
❒ The number of sets you can enter in step
{Clear/Stop} key is pressed.

Stack

Copies can be assembled with each page placed.
If a finisher is installed, each time the copies of one page are delivered, the next
copy is shifted when delivered so you can separate each job by page.
Important
❒ A finisher is required.
74
" is displayed, press the {Clear/Stop} key.
C
differs depending on when the
Draft 2006/03/07