Placing Originals In The Auto Document Feeder - Ricoh C4540 Operating Instructions Manual

A
Lift the exposure glass cover or ADF.
Be sure to lift the exposure glass cover or ADF by more than 30 degrees. Oth-
erwise, the size of the original might not be detected correctly.
B
Place the original face down on the exposure glass. The original should be
aligned to the rear left corner.
Start with the first page to be copied.
A Positioning mark
B Left scale
C
Lower the exposure glass cover or ADF.

Placing Originals in the Auto Document Feeder

Place originals in the ADF.
Settings should be made in the following situations:
❖ When placing originals consisting of more than 100 pages:
See p.20 "Batch Mode".
❖ When placing originals one by one:
See p.21 "SADF Mode".
❖ When copying originals of various sizes:
See p.22 "Mixed Size Mode".
❖ When placing custom size originals:
See p.24 "Custom sizes".
A
Adjust the guide to the original size.
B
Set the aligned originals face up into the ADF.
Do not stack originals beyond the limit mark.
The last page should be on the bottom.
AQH010S
Placing Originals
19
Draft 2006/03/07
1