Ricoh C4540 Operating Instructions Manual page 133

E
Press [All Pages] or [1st Page Only] to select the print page.
F
After making all settings, press [OK].
G
Press [OK].
H
Place your originals, and then press the {Start} key.
Note
❒ When the Full Color Copy is selected, the full color counter will advance
by "1".
❒ The default user stamp color is red.
Reference
See p.110 "To program the user stamp".
See "Stamp Format: 1-4", "Stamp Color: 1-4", General Settings Guide.
Changing the user stamp color
Changes the stamp color.
A
Press [Stamp Color] under Stamp Color.
B
Select the stamp color, and then press [OK].
Changing the user stamp position
Changes the stamp position.
A
Press [Change] under Stamp Position.
Copier Functions
109
Draft 2006/03/07
2