ZyXEL Communications VMG1312-B10C User Manual page 269

Note: This screen is available only when you configure an ATM layer-2 interface.
Figure 158 Maintenance > Diagnostic > OAM Ping
The following table describes the fields in this screen.
Table 118 Maintenance > Diagnostic > OAM Ping
LABEL
F4 segment
F4 end-end
F5 segment
F5 end-end
VMG1312-B10C User's Guide
DESCRIPTION
Select a PVC on which you want to perform the loopback test.
Press this to perform an OAM F4 segment loopback test.
Press this to perform an OAM F4 end-to-end loopback test.
Press this to perform an OAM F5 segment loopback test.
Press this to perform an OAM F5 end-to-end loopback test.
Chapter 36 Diagnostic
269