ZyXEL Communications VMG1312-B10C User Manual page 179

The following figure is an overview of the Device's file server feature. Computers A and B can
access files on a USB device (C) which is connected to the Device.
Figure 95 File Sharing Overview
A
The Device will not be able to join the workgroup if your local area network has restrictions
set up that do not allow devices to join a workgroup. In this case, contact your network
administrator.
13.2.1 Before You Begin
Make sure the Device is connected to your network and turned on.
Connect the USB device to one of the Device's USB port. Make sure the Device is connected to your
1
network.
The Device detects the USB device and makes its contents available for browsing. If you are
2
connecting a USB hard drive that comes with an external power supply, make sure it is connected
to an appropriate power source that is on.
Note: If your USB device cannot be detected by the Device, see the troubleshooting for
suggestions.
Use this screen to set up file sharing using the Device. To access this screen, click Network
Setting > USB Service > File Sharing.
Figure 96 Network Setting > USB Service > File Sharing
VMG1312-B10C User's Guide
B
C
Chapter 13 USB Service
179