Table of Contents
Advertisement
Chapter 7 Home Networking
Click Apply to save your settings.
3
Figure 51 Network Setting > Home Networking > LAN Setup
The following table describes the fields in this screen.
Table 31 Network Setting > Home Networking > LAN Setup
LABEL
Interface Group
Group Name
LAN IP Setup
IP Address
Subnet Mask
IGMP Snooping
Status
104
DESCRIPTION
Select the interface group name for which you want to configure LAN settings. See
12 on page 171
for how to create a new interface group.
Enter the LAN IP address you want to assign to your Device in dotted decimal notation, for
example, 192.168.1.1 (factory default).
Type the subnet mask of your network in dotted decimal notation, for example
255.255.255.0 (factory default). Your Device automatically computes the subnet mask
based on the IP Address you enter, so do not change this field unless you are instructed to
do so.
Select the Enable IGMP Snooping check box to allows the Device to passively learn
multicast group.
Chapter
VMG1312-B10C User's Guide
Advertisement
Table of Contents
