Table of Contents
Advertisement
Chapter 15 MAC Filter
The following table describes the labels in this screen.
Table 80 Security > MAC Filter
LABEL
MAC Address Filter
Set
Allow
Host name
MAC Address
Apply
Cancel
194
DESCRIPTION
Select Enable to activate the MAC filter function.
This is the index number of the MAC address.
Select Allow to permit access to the Device. MAC addresses not listed will be denied
access to the Device.
If you clear this, the MAC Address field for this set clears.
Enter the host name of the wireless or LAN clients that are allowed access to the
Device.
Enter the MAC addresses of the wireless or LAN clients that are allowed access to the
Device in these address fields. Enter the MAC addresses in a valid MAC address format,
that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
VMG1312-B10C User's Guide
Advertisement
Table of Contents
