Voice Vlan Port Settings - D-Link DGS-3700-12 User Manual

the voice VLAN after expiration of the voice VLAN aging timer. If voice traffic resumes during
the aging time, the aging timer will be reset and stop. The range is 1 to 65535 minutes. The
default value is 720 minutes.
Log State Used to enable or disable the sending of issues for the voice VLAN log.
Click Apply to implement changes made.

Voice VLAN Port Settings

This window is used to show the ports voice VLAN information.
To view this window, click L2 Features > VLAN > Voice VLAN > Voice VLAN Port Settings, as shown below:
The fields that can be configured are described below:
Parameter Description
From Port/To Port Select a range of port to display.
State Configure the state of the port, Enabled or Disabled.
Configure the mode of the port. Auto - If the mode is Auto, the port may become the voice
Mode
VLAN member port by auto-learning. If the MAC address of the received packet matches the
configured OUI, the port will be learned as dynamic member port. The dynamic membership
will be removed via the aging out mechanism.
manual - If the mode is set to Manual, the port needs to be manually added into or removed
from the voice VLAN by 802.1Q VLAN configuration command. The default mode is Auto.
Click Apply to implement changes made.
Voice VLAN OUI Settings
This window is used to configure the user-defined voice traffic's OUI. The OUI is used to identify the voice traffic.
There are a number of pre-defined OUIs. The user can further define the user-defined OUIs if needed. The user-
defined OUI cannot be the same as the pre-defined OUI.
To view this window, click L2 Features > VLAN > Voice VLAN > Voice VLAN OUI Settings, as shown below.
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
Figure 4- 20 Voice VLAN Port Settings window
80