802.1Q Vlan Batch Settings - D-Link DGS-3200 Series User Manual
Layer 2 gigabit ethernet managed switch
Hide thumbs
Also See for DGS-3200 Series:
- Cli manual (443 pages) ,
- Hardware installation manual (79 pages) ,
- Reference manual (321 pages)
Table of Contents
Advertisement
802.1Q VLAN Batch Settings
The function allows the user to create an 802.1Q VLAN Batch.
To view this window click L2 Features > 802.1Q VLAN Batch Settings.
The following fields can be set:
Parameter
VID List
Advertisement
Port List
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 7- 8. 802.1Q VLAN Batch Settings window
Description
This field is used to specify the VID range. Supported VIDs on the Switch range from ID
number 1 to 4094. Use the drop-down menu to specify whether to Add, Delete or Config a
specific VID List.
Enabling this function will allow the Switch to send out GVRP packets to outside sources,
notifying that they may join the existing VLAN.
Specifies the port or range of ports to be configured.
80
Advertisement
Table of Contents
