Dscp - D-Link DGS-3700-12 User Manual

DSCP

The DSCP section includes DSCP Trust Settings and DSCP Map Settings.
DSCP Trust Settings
This window is used to enable DSCP Trust Settings on the Switch.
To view this window, click QoS > DSCP > DSCP Trust Settings, as shown below:
Select the port or port range to enable or disable and click Apply.
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
NOTE: Traffic Control cannot be implemented on ports that are set for
Link Aggregation (Port Trunking).
NOTE: Ports that are in the Shutdown forever mode will be seen as
Discarding in Spanning Tree windows and implementations though these
ports will still be forwarding BPDUs to the Switch's CPU.
NOTE: Ports that are in Shutdown Forever mode will be seen as link down
in all windows and screens until the user recovers these ports.
Figure 6- 8 DSCP Trust Settings window
157