D-Link DGS-3700-12 User Manual page 294

Dgs-3700 series layer 2 managed gigabit ethernet switch release 2.00
Hide thumbs Also See for DGS-3700-12:
Table of Contents

Advertisement

Record Number
ExDefer
CRC Error
LateColl
ExColl
SingColl
Collision
Show/Hide
Clear
View Table
View Graphic
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
value is one second.
Select number of times the Switch will be polled between 20 and 200. The default value is
200.
Count the number of packets for which the first transmission attempt on a particular interface
was delayed because the medium was busy.
Count otherwise valid packets that did not end on a byte (octet) boundary.
Count the number of times that a collision is detected later than 512 bit-times into the
transmission of a packet.
Excessive Collisions. The number of packets for which transmission failed due to excessive
collisions.
Single Collision Frames. The number of successfully transmitted packets for which
transmission is inhibited by more than one collision.
An estimate of the total number of collisions on this network segment.
Check whether or not to display ExDefer, CRCError, LateColl, ExColl, SingColl, and Collision
errors.
Clicking this button clears all statistics counters on this window.
Clicking this button instructs the Switch to display a table rather than a line graph.
Clicking this button instructs the Switch to display a line graph rather than a table.
292

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dgs-3700-12g

Table of Contents