Voice Vlan - D-Link DGS-3700-12 User Manual

Click the radio button to identify the VLAN by its VLAN ID. Enter the VID or VID list you wish to
VID List
configure.
Click the radio button to identify the VLANs by their VLAN name.
VLAN Name
Enter a list of ports, or tick the All Ports check box to specify all the ports.
Ports (e.g.:1-5)
Use the drop-down menu to select the packet type.
Packet Type
broadcast – Specifies to count broadcast packets.
unicast – Specifies to count unicast packets.
multicast – Specifies to count multicast packets.
all – Specifies to count all packets.
Use the drop-down menu to select the counter type. To count at the packet level select Packet,
Counter Type
to count at the byte level specify Byte.
To search for a particular VLAN, enter the VID and click Find.
VID (1-4094)
Click Add to create a new entry. To remove an entry click Delete to delete all entries click Delete All.

Voice VLAN

Voice VLAN Global Settings
Voice VLAN is a VLAN used to carry voice traffic from IP phone. Because the sound quality of an IP phone call will be
deteriorated if the data is unevenly sent, the quality of service (QoS) for voice traffic shall be configured to ensure the
transmission priority of voice packet is higher than normal traffic.
The switches determine whether a received packet is a voice packet by checking its source MAC address. If the
source MAC addresses of packets comply with the organizationally unique identifier (OUI) addresses configured by
the system, the packets are determined as voice packets and transmitted in voice VLAN.
To view this window, click L2 Features > VLAN > Voice VLAN > Voice VLAN Global Settings, as shown below:
The fields that can be configured are described below:
Parameter Description
Voice VLAN State
The state of the voice VLAN
Voice VLAN Name The name of the voice VLAN
Voice VID
The VLAN ID of the voice VLAN.
Priority The priority of the voice VLAN, the range is 0 to 7. The default priority is 5.
Aging Time The aging time is used to remove a port from the voice VLAN if the port is an automatic VLAN
member. When the last voice device stops sending traffic and the MAC address of this voice
device is aged out, the voice VLAN aging timer will be started. The port will be removed from
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
Figure 4- 19 Voice VLAN Global Settings window
79