Mld Snooping Static Group Settings - D-Link DGS-3700-12 User Manual

Enter the new rate limit and click Apply.

MLD Snooping Static Group Settings

This window is used to configure the MLD Snooping static group information on the Switch:
To view this window, click L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Static Group
Settings, as shown below.
The following parameters may be viewed or modified:
Parameter
VLAN Name
VID List
IPv6 Address
Click Create to create a new entry. Click Delete to delete an entry. To search for an entry enter the information and
click Find. To view all previously configured entries click View All.
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
Figure 4- 57 MLD Snooping Rate Limit Settings (Edit) window
Figure 4- 58 MLD Snooping Static Group Settings window
Description
Specifies the name of the VLAN for which to configure the MLD snooping static group
information.
Specifies the list of the VLAN IDs for which to configure the MLD snooping static group
information.
Specifies the static group IPv6 address for which to configure the MLD snooping static
group information.
113