D-Link DGS-3700-12 User Manual page 290

Figure 11- 9 Transmitted (TX) Table window (for Bytes and Packets)
The following fields may be set or viewed:
Parameter
Port
Time Interval
Record Number
Bytes
Packets
Unicast
Multicast
Broadcast
Show/Hide
Clear
View Table
View Graphic
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
Description
Use the drop-down menu to choose the port that will display statistics.
Select the desired setting between 1s and 60s, where "s" stands for seconds. The default
value is one second.
Select number of times the Switch will be polled between 20 and 200. The default value is
200.
Count the number of bytes successfully sent on the port.
Count the number of packets successfully sent on the port.
Count the total number of good packets that were transmitted by a unicast address.
Count the total number of good packets that were transmitted by a multicast address.
Count the total number of good packets that were transmitted by a broadcast address.
Check whether or not to display Bytes and Packets.
Clicking this button clears all statistics counters on this window.
Clicking this button instructs the Switch to display a table rather than a line graph.
Clicking this button instructs the Switch to display a line graph rather than a table.
288