Forwarding Detail Settings - Kyocera ECOSYS M8124cidn Operation Manual

Detailed Settings of FAX Functions > Forwarding Detail Settings

Forwarding Detail Settings

[File Format]
If you are sending the file as an E-mail attachment or transferring it to a folder (SMB or FTP), select PDF, TIFF, XPS, or
OpenXPS as the file format.
1
Display the screen.
[System Menu/Counter] key > [FAX] > [Forward Settings] > [File Format]
2
Configure the settings.
Select [PDF], [TIFF], [XPS] or [OpenXPS].
NOTE
If you have selected [PDF] for file format, PDF Encryption functions are available.
Machine's Operation Guide
[File Separation]
When sending by e-mail transmission, folder (SMB) transmission, or folder (FTP) transmission, specify whether File
Separation is performed.
1
Display the screen.
[System Menu/Counter] key > [FAX] > [Forward Settings] > [File Separation]
2
Configure the settings.
Select [Each Page] or [Off].
To create one file per page, select [Each Page].
[E-mail Subject Add. Info.]
Specify whether any information will be added to the subject of the E-mail. When adding information, you can select
either Sender Name or Sender.
1
Display the screen.
[System Menu/Counter] key > [FAX] > [Forward Settings] > [E-mail Subject Add. Info.]
2
Configure the settings.
Select [Sender Name], [Sender FAX No.], or [Off].
[FTP Encrypted TX]
Specify whether to use FTP encryption when you send data.
NOTE
To use FTP encryption, set "SSL" to [On] in the Secure Protocol settings.
Machine's Operation Guide
5-15