Kyocera ECOSYS M8124cidn Operation Manual page 159

Default Setting of FAX [System Menu] > System Menu Settings
ECM TX
TX Start Speed
[Reception]
Media Type
Reduced RX Size
Reception Date/Time
Duplex Printing
2 in 1 Print
Item
Set whether ECM TX is performed.
ECM is a communication mode specified by the ITU-T (International
Telecommunication Union) that retransmits data when an error occurs. Fax
machines that have ECM mode check for errors as they communicate, preventing
distortion of the image due to noise on the line and other conditions.
Value: On, Off
When there is a large amount of noise on the line, communication may take slightly
longer than when [
Set the TX Start Speed.
When communication conditions are bad, the fax may not be transmitted correctly.
In that case, set a lower TX Start Speed.
NOTE
Normally this should be used with the default setting.
Value: 9600bps, 14400bps, 33600bps
Item
Specify the paper type to be used for print output of the received fax.
Value: All Media Types, Plain, Rough, Vellum, Labels, Recycled, Bond, Cardstock,
Color, Envelope, Thick, Coated, High Quality, Custom 1-8
NOTE
Media Type for Print Output (page 4-6)
When the reception size is larger than the paper size, you can reduce the
print size.
Value: Off, On
NOTE
Multi Purpose Tray (page 4-7)
Reception Date/Time function adds the reception date/time, sender information and
number of pages on the top of each page when the received fax is printed out. It is
useful for confirming the time of reception if the fax is from a different time zone.
Value: Off, On
NOTE
Reception Date/Time (page 4-7)
When received multiple pages of data are the same width, they can be printed out
on both sides of paper having the same width as the data.
Value: Off, On
NOTE
Duplex Printing (page 4-7)
When you receive a multi-page Statement or A5 size original, this function prints 2
pages of the original at a time on one Letter or A4 size sheet of paper.
Value: Off, On
NOTE
2 in 1 Print (page 4-7)
Description
] is selected.
Off
Description
8-10