Invacare POC1–100B-C Service Manual page 14

Invacare® Platinum® Mobile
1. Ensure unit is off and connected to an external power
source.
2. Press and hold the display backlight button C.
After 5 seconds the date and time are shown on
the display screen B.
3. While the date and time are shown on the display
screen, press and release the power button A.
Pressing the power button activates the date
and time change mode.
The selected item is highlighted.
14
4. Press the flow selection button D to increase the
selected value by one until the maximum is reached and
then rolls over to the lowest value.
5. Press the display backlight button to decrease the
selected value by one until the minimum is reached and
then rolls over to the highest value.
6. Press the power button to highlight the next item.
7. Press the audio off (mute) button E to highlight the
previous item.
1187375-B