Printek FormsMaster 8000 Operator's Manual page 70

P R I N T E R C O N F I G U R A T I O N
INTERFACE MENU
Twinax
When the optional Coax/Twinax Interface is installed, the printer will
automatically determine which of these two interfaces are being used by
sensing which adapter cable is attached to the printer at power on. If the
Twinax Smart-T adapter is attached, the following Setup items will be
displayed. If you are using the printer in a Coax Configuration, refer to the
previous section of this chapter.
Note: The Twinax Address is selected by using the rotary switch on the
back of the printer next to the 15 pin "D" connector where the twinax
Smart-T adapter is connected.
Printer Emulation
Possible Values:
This item selects the IBM printer model to be emulated.
Default Character Set
Possible Values:
64
4214*, 5225, 5256, 4234
Multinational*
USA
PrinterEmulation
Character Set
Multinational
France
Italy
4214