Push Buttons - Printek FormsMaster 8000 Operator's Manual

Flashing Red:
Yellow:
Flashing Yellow:
Speaker

Push Buttons

ONLINE
The printer is currently off line and cannot
print. This may be due to the operator taking
the printer off line or the printer may have
detected an error condition, such as running
out of paper, which requires operator
intervention. If due to an error condition, the
cause of the error will periodically be shown
on the LCD display. After the cause of an
error condition has been resolved, press the
ONLINE button to clear the error. This will
also place the printer back on line and allow
printing to resume.
The printer is in the process of exiting the
Setup mode and saving Setup values, or the
printer is currently busy performing an
operation with the optional Setup Module.
The user has pressed the SETUP button and
entered the Setup mode (may be exited by
pressing the ONLINE button after the desired
changes have been made). For more
information, see the chapter on "Printer
Configuration".
This device produces various tones to alert the
operator when different error conditions occur.
It may also be used to produce a tone when a
bell character (ASCII BEL) is received from a
host computer.
This button toggles the printer between the on
line and off line state. When the printer is on
line, it may be printing or may begin printing
at any time. To stop the printing or prevent
printing from starting, use this button to take
the printer off line (see "ONLINE Status
Indicator" above). The printer must be off line
D A I L Y O P E R A T I O N
21