Using The Item And Value Buttons; Exiting Setup - Printek FormsMaster 8000 Operator's Manual

menus have submenus. If no submenu is available, the bottom line will be
blank and the SUBMENU button will not be used.

Using the ITEM and VALUE Buttons

Once the correct menu and submenu (if available) is selected, pressing either
of the ITEM buttons will cause the various items and their current values to
be displayed. Note that the items and their values are right justified and are
thus controlled by the buttons to the right of the display. To scroll through
the items available, use the ITEM buttons. To change the value of the
displayed item, use the VALUE buttons to step through the possible choices.
Remember to leave the correct value displayed before selecting a different
item or menu, since "what you see is what you get" when Setup Mode is
exited.

Exiting Setup

Two methods of exiting Setup are available. If you wish to exit Setup and
remain off line, press the MENU button to display the following option.
No
Yes
Pressing the button indicated for No will allow you to make additional
menu choices. Pressing the button indicated for Yes will display one of the
following messages depending on whether or not changes were made, reset
the printer if changes were made, and then leave the printer off line.
Exiting Menus
Saving Changes
Exiting Menus
No Changes
To exit Setup Mode and automatically go on line, press ONLINE. The
display will now show one of the above messages, if changes were made,
and automatically go on line.
P R I N T E R C O N F I G U R A T I O N
Exit Setup
Menus?
41