Printek FormsMaster 8000 Operator's Manual page 131

S P E C I F I C A T I O N S
Power requirements: 120 VAC 10%, 60Hz.
Power consumption:60 W non-printing, 225 W printing.
Heat Output: 205 Btu/Hr. Idle, 768 Btu/Hr. Printing.
Audible noise: 55 dBA when used with a
Printek FormsMaster 8000 print stand..
Operating Temperature: 50 F to 95 F.
Relative Humidity: 20% to 80% non-condensing.
Physical Size: 11.8" High x 26.25" Wide x 20.5" Deep.
Weight: 63 lbs (74 lbs shipping).
OPTIONS
Coaxial/Twinaxial Interface
Coaxial IPDS Interface
Twinaxial IPDS Interface
Ethernet 10BaseT Interface
Imager or ImagerPlus Graphics Co-Processor
Paper Cutter
Setup Module
Print Stand
240 VAC 10%, 50Hz. Power Supply
* May be emulation dependent.
Specifications subject to change without notice.
125