Printek FormsMaster 8000 Operator's Manual page 51

Form Length
Possible Values:
This item sets the form length in lines at the current line pitch (LPI). For
example: for an eleven inch form, enter 66 if you are using six lines per inch
or 88 if you are using eight lines per inch.
Top Margin
Possible Values:
This item sets the top margin in lines. Setting a top margin will reduce the
size of the printable area of the page by the number of lines set. Printing
will not be allowed above the top margin.
Note: In most cases changing where printing begins on a form should be
accomplished with ALIGN PRINT rather than with a top margin.
Adding a top margin may cause some programs to print the first form
correctly and then print following forms too far down the page if the
program sending the data does not require the margin.
Bottom Margin
Possible Values:
This item sets the bottom margin in lines. Setting a bottom margin will
reduce the size of the printable area of the page by the number of lines set.
When the bottom margin is reached, the remainder of the page will be
skipped and printing will resume at the beginning of the next page (or top
margin if one is set). Adding a bottom margin may cause some data to be
printed on the wrong page if the program sending the data does not require
the margin.
P R I N T E R C O N F I G U R A T I O N
1 ... 66* ... 227 Lines
0* ... 226 Lines
0* ... 226 Lines
Form Length
66 Lines
Top Margin
0 Lines
Bottom Margin
0 Lines
45