5. Connect the Remote Supervisor Adapter Ethernet port on each server to a
network or to each other with an Ethernet crossover cable. This connection is
needed so that the Remote Supervisor Adapters can communicate and perform
the necessary functions for the two servers to create or delete scalable
partitions.
6. Route any remaining cables through the cable-management arms.
7. Secure the cables in the cable-management arms with the hook-and-loop straps
that come with your server.
8. Go to "16-way configuration" on page 67 in the "RXE Expansion Port cabling"
section of this publication and complete that procedure.
Chapter 2. Installing options
63