IBM xSeries 445 Type 8870 Option Installation Manual page 48

Figure 30. Locking lever position for installing the SMP Expansion Module
2. Install the SMP Expansion Module into the server:
Figure 31. SMP Expansion Module locking lever position
36
xSeries 445 Type 8870: Option Installation Guide
e. Lift slightly on the locking levers and rotate them back until they stop.
Locking
levers
a. Lift the SMP Expansion Module by its handle and use the finger relief to
hold the SMP Expansion Module steady.
b. Being careful not to damage the components on the center planar, lower the
SMP Expansion Module into the server.
c. Release the handle and slide the SMP Expansion Module toward the center
planar until it stops.
Handle
Locking
levers
Center plane
Handle