Connecting Arm Assembly - SOLE SE578SA Service Manual

Model
Parts
Procedures：
1. Use Phillips head screwdriver to
release Connecting Arm Covers, as
shown in figure 1.
2. Use 12 and 13 mm wrenches to release
5/16" x1-1/4" hex head bolt, 5/16" x
20 x 1.5T flat washer and 5/16" x 7T
nut which secure the Fish-Eye bearing,
as shown in figure 2.
Use 12 mm wrench to release 5/16" x
3.
15m/m hex head bolt and 5/16" x 20
x1.5T flat washer and Pedal Carriage
Bolt to take apart the Connecting Arm
Assembly, as shown in figure 3.
4. To take apart the Pedal Assembly, first
release the tension spring, as shown in
figure 4.
SE578SA

2. Connecting Arm Assembly

Service Replacing Parts
Rev.
1
2
3
4