SOLE SE578SA Service Manual page 8

Model
Parts
Procedures：
1. Follow the procedure 2 to take apart
the Connecting Arm Assembly.
2. Use Phillips head screwdriver to
unscrew Pedal Arm Cover, as shown
in figure 1.
3. Use M8 and 14mm wrenches to release
3/8"x 2-1/4"socket head cap screw,
2pcs of 3/8"×19×1.5T flat washers
and 3/8"x 11T Nylon nut and take
apart Pedal Arm Assembly, as shown
in figures 2 and 3.
4. To take the Bushing Housing apart,
use 12mm wrench to release 5/16" x
15m/m hex head bolt and 5/16" x 35
x1.5T flat washer, as shown in figure
4.
5. Reverse above steps to resume all
parts.
SE578SA
3 Pedal Arm Assembly
Service Replacing Parts
Rev.
1
2
3
4