ASSEMBLY TOOLS
#184. 13/14mm Wrench (160mm)
#186. Phillips Head Screwdriver
E95 ASSEMBLY INSTRUCTIONS
PRE-ASSEMBLY
1. Using a razor knife (Box Cutter) cut the outside, bottom, edge of box along
the dotted Line. Lift Box over the unit and unpack.
2. Carefully remove all parts from carton and inspect for any damage or missing
parts. If damaged parts are found, or parts are missing, contact your dealer
immediately.
3. Locate the hardware package. Remove the tools first. Remove the hardware
for each step as needed to avoid confusion. The numbers in the instructions
that are in parenthesis (#) are the item number from the assembly drawing
for reference
customerservice@dyaco.ca
#185. Short Phillips Head Screwdriver
#187. 12/14mm Wrench (160mm)
9
Dyaco Canada Inc. 2016