SOLE SE578SA Service Manual page 12

Model
Parts
Procedures：
5. To resume, secure the Round Disk on
the Cross Bar and return it on the
Crank Axle, align the Cross Bar with
square hole and put 7x7x25L
Woodruff Key in the hole and tighten
M8x40 socket head cap screw together
with two M8x6.3T nuts until it reaches
500 Kg-cm. Return and tighten 5/16" x
15m/m hex head bolt with 5/16" x 35 x
1.5T flat washer, as shown in figures 5
and 6.
6. Follow above procedures to resume
Connecting Arm, Pedal Arm, and both
left and right Side Cases with Round
Disk Cover.
SE578SA
5 Cross Bar Assembly
Service Replacing Parts
Rev.
5
6