Side Cases - SOLE SE578SA Service Manual

Model
Parts
Procedures：
1. Follow procedures 2 and 3 to release
Connecting Arm Assembly and Pedal
Arm Assembly.
2. Slightly press the Console Mast Cover
to take it apart from Side Cases, as
shown in figure 1.
3. Use Phillips head screwdriver to
release 7pcs of 4x19 self tapping
screws and 3pcs of 5x16 x 3 tapping
screws to take Right Side Case apart,
as shown in figures 2 and 3.
4. To take the Left Side Case apart,
release 4x15 self tapping screws with
1/4"x19 flat washers on the main
frame and 3pcs of 5x16 Tapping
Screws. Then disconnect two red
jumpers and white grounding
(remember to mark for red jumpers) to
release left Side Case, as shown in
figures 4, 5 and 6.
SE578SA
4 Left and right Side Cases
Service Replacing Parts
Rev.
1
2
3
4