System Settings - Samsung MIM-D01AN User Manual

System Settings

Adding a User
You can add, edit and delete the user of DMS2.5.
1
Click [System Settings]
2 Click [Add user] when user management screen appears.
User information input window will be appeared when pressing [Add user].
3 Enter ID, password, Nickname and description for new user and then select authority.
The user ID should be between 4~12 letters and English lower case letters and
numbers only can be used. (English capital letter and special symbols including
space cannot be used for user ID.)
The password should be between 8~12 letters and English capital/lower case
letters, and numbers only can be used, without any spaces. In addition, the
password should contain both English letters and numbers.
Name should be within 20 letters, and description should be in 50 letters.
Registration date will be input automatically as system date.
Select authorization for the user from 'Admin', 'Manager' and 'Regular user'.
Admin has all authorization and 'Manager'/'Regular user' has limited authorization.
4
Click [Save].
Maximum of 256 users can be registered.
User information will be saved in DMS2.5.
Note For security and maintenance, you should change the password of the admin
account that is issued by the factory for shipping purposes.
Administrator(Admin) can change all setting of indoor/outdoor unit.
Administrator(Admin) can check all indoor/outdoor units connected to DMS2.5.
Administrator(Admin) can edit zone information and assign the zone
information to manager.
A manager can check and control indoor/outdoor units
which belong to assigned zones only.
[User management] when DMS2.5 web page menu screen appears.
109
E-