Samsung MIM-D01AN User Manual page 149

Communication Mode Setting by Channel
1
Click [System Settings]
2
Click [Edit] from communication mode by channel setting.
[Edit] will change to [Cancel].
Selection buttons are enabled. However, the channels which have searched
device maintains its selection button disabled.
3
When each channel is enabled, check the communication mode you want to set by
channel.
You cannot change the communication mode of channel which has currently
connected device.
When 'NEW' is set as communication mode, setting will allow tracking,
monitoring and controlling devices that support NEW communication mode.
IM mode cannot be set, but it can be used for function change or new function
with an updated version.
4
Click [Save] after setting is completed.
"Reading data from DMS2.5. Please wait." message appears and saving is
completed.
Then, tracking page with disabled items will be displayed again.
If you click [Cancel], check boxes will be disabled and [Cancel] will change to
[Edit].
[Tracking] when DMS2.5 web page menu screen appears.
149
E-