Samsung MIM-D01AN User Manual page 107

Enable/Disable Control Logic
1
Click [Control logic management]
when DMS2.5 web page menu screen appears.
2 Select control logic when control logic screen appears.
3
Click [Apply]/[Not apply].
The selected control logic will be applied by clicking
[Apply].
The selected control logic will not be applied by clicking
[Not apply].
Note When the selected device is Hydro unit, Hydro unit HT or
Single EHS and Thermostat #1 or Thermostat #2 is ON,
the control logic of the desired temperature, water out
temperature and operation mode cannot be controlled.
When the selected device is Single EHS and the
hot water thermostat is ON, the control logic of
the desired temperature for hot water cannot be
controlled.
[Setting control logic]
107
E-