Control and Monitoring (Continued)
Cycle Monitoring
You can select an indoor unit and check cycle information.
1
Click [Control and Monitoring]
screen appears.
2
Click [Select].
DMS2.5 installation information will be displayed.
3
Select a device to check cycle information.
If you select OnOff controller, its subordinate outdoor unit which has the earliest
address will be selected.
If you select an outdoor unit, all the information of the module (that are connected
to the selected outdoor unit) will be displayed.
If you select indoor unit, upper outdoor unit will be selected.
4
Cycle information of selected outdoor unit and subordinate indoor units.
If the status of outdoor unit and indoor unit is changed, status value turns into blue.
58
E-
[Cycle Monitoring] when DMS2.5 web page menu