Samsung MIM-D01AN User Manual page 152

System Settings (Continued)
152
E-
6
Tracking completed message will appear.
Select Zone initialization mode you want and click [OK].
Not initialize: No zone information initialization will be
made.
Initialize individually: Initialize zone information as
Initialize by group: Initialize zone information as group
Note If tracking is executed successfully while NEW is set
as communication mode for each channel, virtual
OnOff controller will be assigned to each channel.
If there is no searched outdoor unit, OnOff controller,
SIM/PIM, it is regarded as DVM tracking failure.
If there are devices which have same address, first
searched device will be registered only.
The number of OnOff controller doesn't contain
the number of virtual OnOff controller that is used
in NEW communication.
Group initialization will not be applied to Hydro Unit,
Hydro Unit HT and Single EHS.
If you execute tracking, system setting will be initialized.
If tracking result does not match with actual installation
information, there can be critical error in additional
functions such as power distribution.
Make sure that tracking information matches to actual
installation information after tracking.
individual mode.
mode.