Samsung MIM-D01AN User Manual page 54

Control and Monitoring (Continued)
54
E-
7 Select the ERV operation mode.
You can select Auto, Heat Ex, By pass and Sleep mode.
8 Select the fan speed.
You can select Low, high and Turbo.
If Sleep mode is in operation, the fan speed will be set as
Low fan speed.
9 When controlling certain types of devices in detail, select
the device you want to control on the list of the 'Selected
Device'.
Note If the ERV type devices are not on the list of the
'Selected Device' , ventilation control will not be
activated.
If the indoor unit type devices are not on the list of the
'Selected Device' , Indoor control will not be activated.
When controlling an indoor unit, ERV devices
(ERV, ERV PLUS) cannot be controlled.
When controlling ERV devices, Indoor unit (Indoor unit,
AHU, Fresh duct) cannot be controlled.
You can select power OnOff, Disable RC, Reset filter,
Indoor Control (Desired temp, operation mode, fan
speed) and ERV Control in the 'Basic control' .
Power OnOff, Disable RC and Reset filter are controlled
to all the devices.
When selecting multiple devices, the list of the selected
devices will be displayed at the bottom of the remote
controller. When selecting the device you want to
control, the remote control panel of the selected device
will be activated and you can control the selected
device in detail. However, the rest of the devices cannot
be controlled other than the selected device.
DVM CHILLER cannot be selected with other types of
devices and can be selected with DVM CHILLERs only.