Samsung MIM-D01AN User Manual page 163

Auto Address Setting (DHCP CONFIG)
192.168.0.100
06:12:13(AM)
1. Check main menus by pressing [Menu], [▲], [▼] or [Set] button.
MAIN MENU
1.IP Config
2. Select 1.IP Config by pressing [▲] and [▼] buttons, and press [Set] button.
Network setting screen will be displayed.
DHCP CONFIG
Current disabled
3. Select auto address setting function(DHCP CONFIG) by pressing [▼] button.
Auto address setting function status will be displayed.
- Current disabled: Auto address setting function disabled
- Current enabled: Auto address setting function enabled
Enable DHCP?
YES:Set, NO:Menu
4. Enable/Disable auto address setting function by pressing [Set] button.
If auto address setting function enabled
- You can change it to disabled status by pressing [Set] button.
If auto address setting function disabled
- You can change it to enabled status by pressing [Set] button.
To maintain current status, press [Menu] button.
DHCP function is not available when you use BACnet Gateway function.
163
E-