Samsung MIM-D01AN User Manual page 51

Monitoring the selected multiple devices operation status
You can monitor the operation status of other type devices,
and control other type devices as a whole, or as individual units.
1 Click [Control and Monitoring] when DMS2.5 web page menu screen appears.
[Control and Monitoring] screen will appear when you log-in to DMS2.5 web page.
2 Check the status of the selected multiple devices.
Check the status of an indoor unit through status display window.
When the selected devices are switched on, the remote controller panel will be
automatically activated.
Note When users select multiple devices, 'Basic Control' will be displayed
on the screen. (This is when different types of multiple devices are selected.)
The current status of last selected indoor unit type devices (Indoor unit, AHU,
Fresh duct) will be displayed on the 'Indoor control' .
The status of last selected ERV type devices (ERV, ERV PLUS) will be displayed
on the 'Ventilation Control' .
The list of the selected multiple devices will be displayed on the 'Selected Device' .
Hydro Unit, Hydro unit HT and Single EHS do not support multiple selection with
other devices and you can only control and monitor the Hydro Unit, Hydro Unit
HT and Single EHS individually. When you select Hydro Unit or Hydro Unit HT or
Single EHS while multiple devices are already selected, previously selection (of
multiple devices) will be canceled.
Status display window
51
E-