Verifying Correct Operation Through The Led Indicators - Nortel 7220 Installing Manual

Hide thumbs Also See for 7220:

Table of Contents

DRAFT March 24th-2005

32 Slip the protective rubber boot the remainder of the way to the base of the

antenna.

Figure 8 Install the protective boots

33 Ensure that the protective boot is firmly in place.

34 Repeat steps

Verifying correct operation through the LED indicators

35 If installing a Wireless AP 7220@NAP, run the Ethernet cable to the desired

Ethernet feeder and splice using standard connectors.

36 Apply power to the Wireless AP 7220 unit.

The LED at the bottom of the unit turns red indicating the unit is powering up.

Consult

AP 7220 or

7220 @ NAP.

Table 1 Standalone Wireless AP 7220 LED Indicators

LED Pattern

Solid Red

Alternating Red/Amber

Alternating Red/Green

with the second antenna.

Table 1

to interpret the different LED states for a standalone Wireless

Table 2

to interpret the different LED states for a Wireless AP

Status

Power-up/Initializing

Initialized + No Transit Link

Initialized + Transit Link

Detected

Installing the Nortel Wireless Access Point 7220

antenna boot

Description

Basic Services not yet

initialized

Initialized but no Transit Link

Neighbors Detected

1 or more neighbors

detected

Table of Contents