DRAFT March 24th-2005
Installing the Wireless AP 7220
Use the Wireless AP 7220 mechanical support to mount the Wireless AP 7220
vertically or horizontally on a:
•
horizontal pole
•
vertical pole
•
wall (side of a building)
•
ceiling
Note:
Please read all instructions prior to installation.
The mechanical support consists of three major components (see
•
base plate adaptor (shown) and pole band clamps (not shown)
•
cylindrical housing
•
inner wiring / divider arm inside the cylindrical housing
Figure 2 Wireless AP 7220 mechanical support
Use the band clamps to fix the mechanical support to the horizontal or vertical
pole. The mechanical support allows adjustment of + 20 degrees to accommodate
a pole that is tapered or offset from the vertical or horizontal mounting plane.
Installing the Nortel Wireless Access Point 7220
3
Figure
2):