Dtmf Memory; Programming A Dtmf Code - Icom IC-V8 Instruction Manual

6
MEMORY PROGRAMMING
D Memory/call
call/memory
q
Select the memory (call) channel to be transferred:
Push [C• ] ([ B•
MR
CALL
Push [Y]/[Z] to select the memory channel.
• When "dial" is assigned [VOL], rotate [VOL] to select the memory
channel. (p. 51)
w
Push [C• ] momentarily after pushing [A•
MR
• "--" and " X " flashes.
e
Push [Y]/[Z] to select the target memory.
• When "dial" is assigned [VOL], rotate [VOL] to select the memory
channel. (p. 51)
r
Push [C• ] for 1 sec after pushing [A•
MR
• Memory mode is selected and the contents are transferred to
the target memory.
D Clearing a memory
q
Push [C• ] after pushing [A•
MR
mode.
• " X " and a memory channel number flash.
w
Push [Y]/[Z] to select the memory channel to be cleared.
• When "dial" is assigned [VOL], rotate [VOL] to select the memory
channel. (p. 51)
• The call channel cannot be cleared.
e
Push [C• ] after pushing [A•
MR
[C• ] for 1 sec after pushing [A•
MR
• Perform this operation within 1.5 sec.
• The contents of the selected memory are cleared.
r Push [D• ] to return to regular operation.
CLR
27
]) to select memory (call) mode.
].
FUNC
].
FUNC
] to enter memory transfer
FUNC
] momentarily, then push
FUNC
] again.
FUNC

DTMF MEMORY

Programming a DTMF code

The transceiver has 5 DTMF memory channels (d0 to d4) for
storage of often-used DTMF codes of up to 24 digits.
q
Push [0• - ] after pushing
DTMF M
[A• ] to enter DTMF memory.
FUNC
• One of "d0" to "d4" appears.
w
Rotate [VOL] to select the desired
channel.
e
Push [0• - ] for 1 sec. after
DTMF M
pushing [A• ] to enter DTMF
FUNC
programming mode.
• "_ _ _ _ _" appears.
• Programmed memories can be cleared in this way.
r
Push the digit keys, [A•
FUNC
] and [#• ] to enter the desired DTMF code.
TION ENT
• A maximum of 24 digits can be input.
• [ • ] enters as "E", [#•
OPTION
• If a digit is mistakenly input, push [SQL] or [PTT] momentarily
q
then repeat from step .
t
Push [SQL] or [PTT] to input the digits and exit DTMF pro-
gramming mode.
• Programmed DTMF codes sound when [SQL] is pushed to exit.
MR
MR
], [B• ], [C• ], [D• ], [ •
CALL MR CLR
] enters as "F."
ENT
7
-
OP
28