Lexus NX300 Owner's Manual page 375

3
Connect a positive jumper cable clamp to
clamp on the other end of the positive cable to
connect a negative cable clamp to
clamp at the other end of the negative cable to
Positive (+) battery terminal (your vehicle)
A
Positive (+) battery terminal (second vehicle)
B
Negative (-) battery terminal (second vehicle)
C
Solid, stationary, unpainted metallic point away from the battery and any mov-
D
ing parts as shown in the illustration
4
Start the engine of the second vehicle. Increase the engine speed slightly and
maintain at that level for approximately 5 minutes to recharge the battery of
your vehicle.
5
Open and close any of the doors of your vehicle with the engine switch off.
6
Maintain the engine speed of the second vehicle and start the engine of your
vehicle by turning the engine switch to IGNITION ON mode.
7
Once the vehicle's engine has started, remove the jumper cables in the exact
reverse order from which they were connected.
Once the engine starts, have the vehicle inspected at your Lexus dealer as soon as
possible.
LEXUS NX300
al_USA_OM78211U
7-2. Steps to take in an emergency
C
Owners Manu-
on your vehicle and connect the
A
on the second vehicle. Then,
B
on the second vehicle and connect the
.
D
377
7