164
4-2. Driving procedures
Turn signal lever
Operating instructions
1
Right turn
2
Lane change to the right (move the
lever partway and release it)
The right hand signals will flash 3
times.
3
Lane change to the left (move the
lever partway and release it)
The left hand signals will flash 3
times.
4
Left turn
■
Turn signals can be operated when
The engine switch is in IGNITION ON
mode.
■
If the indicator flashes faster than usual
Check that a light bulb in the front or rear
turn signal lights has not burned out.
■
Customization
→P.409
LEXUS
NX300
al_USA_OM78211U
Owners
Manu-
Parking brake
The parking brake can be set or
released automatically or manually.
In automatic mode, the parking
brake can be set or released auto-
matically according to shift lever
operation. Also, even in automatic
mode, the parking brake can be set
or released manually.
Parking brake operation
■
When the engine switch is not in IGNI-
●
TION ON mode, the parking brake can-
not be released using the parking brake
switch.
●
When the engine switch is not in IGNI-
TION ON mode, automatic mode (auto-
matic brake setting and releasing) is not
available.
If "Parking Brake Overheated Parking
■
Brake Unavailable" is displayed on the
multi-information display
If the parking brake is operated repeatedly
over a short period of time, the system may
restrict operation to prevent overheating. If
this happens, refrain from operating the
parking brake. Normal operation will return
after about 1 minute.
Parking brake operation sound
■
When the parking brake operates, a motor
sound (whirring sound) may be heard. This
does not indicate a malfunction.
Parking brake indicator light and park-
■
ing brake lamp
Depending on the engine switch mode,
●
the parking brake indicator light and
parking brake lamp will turn on and stay
on as described below:
IGNITION ON mode: Comes on until
the parking brake is released.
Not in IGNITION ON mode: Stays on
for approximately 15 seconds.
●
When the engine switch is turned off with
the parking brake set, the parking brake