Lexus NX300 Owner's Manual page 228

230
4-5. Using the driving support systems
For vehicles sold in Canada

WARNING
Handling the radar sensor
■
One Blind Spot Monitor sensor is
installed inside the left and right side of
the vehicle rear bumper respectively.
Observe the following to ensure the
Blind Spot Monitor system can function
correctly.
● Keep the sensor and its surrounding
area on the bumper clean at all times.
LEXUS NX300
al_USA_OM78211U
Owners Manu-
● Do not subject the sensor or surround-
ing area on the bumper to a strong
impact. If the sensor moves even
slightly off position, the system may
malfunction and vehicles that enter the
detection area may not be detected. If
the sensor or surrounding area is sub-
ject to a strong impact, always have the
area inspected by your Lexus dealer.
● Do not disassemble the sensor.
Do not attach accessories or stickers
●
to the sensor or surrounding area on
the bumper.
Do not modify the sensor or surround-
●
ing area on the bumper.
● Do not paint the rear bumper any
color other than an official Lexus color.
● If the radar sensor needs to be
replaced, contact your Lexus dealer.
The Blind Spot Monitor function
The Blind Spot Monitor function uses
radar sensors to detect vehicles that